Setup VM Kiosk Device

Go to menu – System Setup - Devices

Click on  icon to Add VM device and add necessary parameters and save

   

Additionally, go to Visitor Printer settings Tab  and setup following items and click save

Printer IP - Must match the Static IP address assigned to Brother Label Printer

Printer Label Type - Must match the cassette loaded on Brother Label Printer

Print Orientation - Must match the orientation of cassette

• Related Articles

• VM Kiosk Setup - Samsung Tablet

        1. Select default language – English (United Kingdom)           2. Agree to just End User License Agreement and click Next           3. Skip the step to bring old data           4. Select Wi-Fi network for the device and enter password, make ...

• Temperature Kiosk Setup

  Introduction       This document briefs detailed information on Temperature Kiosk setup on both Synergy Workforce GUI and Temperature Kiosk Device Device Homepage                 Top Information Bar:             The time information bar will ...

• Visitor Management Setup

  Go to Menu, Visitor Management and click on Visitor settings General Tab       Allows defining general information that will be visible on VM Kiosk       1. Company Logo - Upload your company logo that will be visible on the VM Kiosk       2. Keep ...

• Device Setup Overview

  For both Physical and Virtual devices, they must exist in the system in order to capture the swipes in the system Devices are setup within Menu - System Setup - Devices Filter Device       Click on icon to filter devices  Add Device       Click on ...

• Adam 6050 Device Setup

  Introduction  ADAM 6050 Ethernet based data acquisition and control modules provide I/O, data acquisitions, and networking in one module.   Through standard Ethernet networking, ADAM 6050 retrieves I/O values from sensors (Fire Panel), and publishes ...