SY 7xx
SY785 - How to delete an employee
If you want to delete an employees template on the SY785 device, then follow these steps to do so successfully. Press the ENROLL key to enter Enrolment Mode The display will require the Master (MST) Code. This is 7234, then press Press 2 to Delete an ...
SY785 - Troubleshooting Checklist
There are many ways to ensure that your machine is up and running and doesn't need further assistance to fix it. Here are common issues that can be fixed with a few simple steps. Troubleshooting checklist: Check that the Network cable is plugged into ...
SY715 - TCP/IP Settings
1. Press 6 x IN & OUT key simultaneously until the display changes to SY777 Ver.4.321 In case of the display says NO PROG: PLEASE ENTER 6 X 0 (EACH INSERT WILL HAVE ASTERIK) 2. Press Enter key 3. Adjust RTC (N/Y) =N and Press Enter ...
SY780 - Finger Enrolment Guide
This document describes the process of enrolling the finger templates for all the employees within an organisation on the terminal SY780 All employees must exists and be active within personnel on Synergy Workforce prior to any finger enrolment. 1. ...
SY745 - Finger Enrolment Guide
This document describes the process of enrolling the finger templates for all the employees within an organisation on the terminal SY-745 All employees must exists and be active within personnel on Synergy Workforce prior to any finger enrolment. ...
SY785 - Create and Clear Memory Crash Procedures
1. Clear Memory Crash Step 1. Press 6 times on the 0 key. Asterisk appears for each time that this key is pressed. Step 2. Press once on the Enter key. Step 3. Press 3 times on the UP key. Step 4. ...
SY780 - Create and Clear Memory Crash Procedures
1. Clear Memory Crash Step 1: Press 6 times on the 0 key. An asterisk appears for each time that this key is pressed. Step 2: Press once on the Enter key. Step 3: Press 3 times on the line up key. Step 4: ...
SY777 - Create and Clear Memory Crash Procedures
1. Clear Memory Crash Step 1. Press 6 times on the 0 key. An asterisk appears for each time that this key is pressed. Step 2. Press once on the Enter key. Step 3. Press 3 times on the Arrow UP key ...
SY745 - Create and Clear Memory Crash Procedures
1. Clear Memory Crash Step 1: Press 6 times on the 0 key. An asterisk appears for each time that this key is pressed. Step 2: Press on the Enter key once. Step 3: Press 3 times on the line up key. (Next to the ...
SY711 to SY715 - Create and Clear Memory Crash Procedures
1. Clear Memory Crash Step 1. Press 6 times on the F2 key (SY711) or the 0 key (SY715). An asterisk will appear for each time that this key is pressed. Step 2. Press once on the F4 key (SY711) or the ENTER key ...
SY7xx Devices - Maintenance Screen
Menu - Maintenance - SY7xx Devices screen allows: Device Status - Contacts each device selected to check communication and the status readout of the memory buffer. Request Template List - Returns a list of all staff with a Finger template stored in ...
SY785 - Finger Enrolment Guide
Prior to enrolling finger template of an employee, System Administrators must make sure following: Employee does exist and is Active within Synergy Workforce Devices has been defined to use F6 to enrol finger Templates on the terminals Press F6 key ...