Using PIN for SY910
If for whatever reason an employee is unable to register for Face and the customer wishes to use PIN instead of cards then the following must be done.
1. Set the verification method to Badge & Pin in personnel.
2. Set a pin in the Pin Code field then save.
To access device successfully using your PIN follow these steps:
1. Press FUNC >> ESC2. Enter your ID (badge number)3. Press ENT4. Enter your PIN5. Press ENT
From here you will have access to the device.
Need to sync an employee to SY910 instead? Follow this link.
Related Articles
Using PIN for Synergy A
If for whatever reason an employee is unable to register their finger on device and the customer wishes to use PIN instead of cards then the following must be done. 1. Set the verification method to Badge & Pin in personnel 2. Set a pin in the Pin ...SY910 - Troubleshooting Checklist
There are many ways to ensure that your machine is up and running and doesn't need further assistance to fix it. Here are common issues that can be fixed with a few simple steps. The checklist: Check that the cable is plugged into the socket ...How to sync an employee to SY910
If you have made any changes to an employees templates on the Synel platform (such as adding pin so they use that instead of face recognition) then the following must be done to sync the employee to the device and the Synel platform. 1. Log into the ...Synergy Face 910 - Admin Management Guide
You can setup admin of the device in 2 ways: 1. Synergy Workforce GUI 2. On Device 1. Synergy Workforce GUI Setup employee as an admin Go to Personnel screen and edit respective employee Go to Additional Settings Tab ...Threshold settings for Synergy 10 facial recognition
If you are having issues with face recognition on your device or you are finding the facial recognition too constricting, these are the steps to successfully navigate to the threshold settings on your Synergy 10 device. 1. On the device select the ...