Synergy Face 910 - Admin Management Guide

Synergy Face 910 - Admin Management Guide

You can setup admin of the device in 2 ways:

      1. Synergy Workforce GUI

      2. On Device

1. Synergy Workforce GUI

      Setup employee as an admin
  1.       Go to Personnel screen and edit respective employee
  2.       Go to Additional Settings Tab
  3.       Switch ON "Synergy Face Admin" and select the Admin Auth. mode from the drop down option


Employee must have either Face template enrolled or Card no assigned or Pin no assigned before selecting the Admin Authentication mode

      d. Go to Maintenance screen - Synergy Face Device WS - Employees Tab, select the employee and click on Sync.

                                   

2. On Device
  1.       Press Menu
  2.       If admin exists on device, it will ask to Verify.
  3.       If no admin exists on device, it will show the menu options

Set Admin.         
  1.       Device allows up to 8 admins
  2.       A <Null Admin.> sign will display for unset admin.
  3.       Choose a <Null> account to register an admin.
  4.       Input Admin. ID: Input an ID for admin. If the ID is in the device database, then the terminal displays admin.’s name. 

Admin. Types
  1.       Super Admin - can operate all functions and normal administrators.

Verification modes:
  1.      ID and Pin: Use ID and password sequentially as a verification method.
  2.      ID and Face: Use ID and face sequentially as a verification method.
  3.      Card and Face: Use card and face sequentially as a verification method.
  4.      Card: Use card as a verification method.


Admin Verification                                         

       Press MENU to activate admin verification process.
  1. Input admin. ID (or using registered RFID card)
  2. Input corresponding pin or using face verification, according to the mode during admin registration
  3. If  verification is successful, it will show the Menu on screen
Modify & Delete Admin account                

       Select a registered admin. account to modify or delete this account.
    1. Modify admin. name
    2. Change verification mode
    3. Modify pin
    4. Re-enrol face template
    5. Re-register RFID card
    6. Delete the certain admin. account
Device will not allow deleting, if it has only one registered admin. account.




    • Related Articles

    • Synergy Face 910 - Employee Face Enrolment Guide

      Follow these guidelines for trouble-free enrolments. During the enrolment process the employee should keep their eyes centred on the screen always. Try to keep a solid box around your face by following the steps below:   2. Guidelines: SY Face 910 ...

    • Synergy Workforce - Employee Face Template Management Guide

      Menu - Maintenance - Synergy Face Templates screen allows: Displays who are enrolled and who are not enrolled Enrolled Date Allows deleting the template from Database Allows changing the Face Employee authorisation mode Allows allocating Face device ...

    • Synergy 10" Enrolment Guide

      Follow these steps for a trouble-free enrolment process. Enrolment Guide On Synergy 10’ device go to the settings icon available at the top left corner of the screen. This will prompt a dialog box to put in the Admin code. Either Key in the available ...

    • Synergy App Guide

      1. Installing Synergy App         Android Device       Go to Play Store on device and search for Synergy App on the store.           Click on the application to install       iOS Device            Go to Apple store on device and search for Synergy ...

    • Synergy Workforce - Maintenance Screen - Sync Guide

      Menu - Maintenance - Synergy Face Devices screen allows: By Devices: Sync Work Codes Sync OFFLINE data Sync New Templates Sync All Templates Sync Firmware  By Employees: Sync Templates and OFFLINE data of selected employees to all Synergy A Devices