SY785 - Troubleshooting Checklist

SY785 - Troubleshooting Checklist

There are many ways to ensure that your machine is up and running and doesn't need further assistance to fix it. Here are common issues that can be fixed with a few simple steps.

Troubleshooting checklist:
  1. Check that the Network cable is plugged into the port labelled 'NET' underneath the clock.
  2. Check the other end is plugged into a live network point.
  3. Rebooting the clocks could start to send data through. For non-PoE clocks, unplug the power from the mains for 5 minutes and then plug back in. For PoE clocks, disconnect the PoE injector for 5 minutes and then plug it back in.
  4. Can employees clock in and out on the clock or is the power completely off on the clock?
  5. Check that the power is live.
  6. Please confirm if any error message appears on the screen. If so, what does the message say?
  7. Confirm the firewall is configured to allow outbound traffic on TCP Port 3734.
  8. Confirm that the fixed local IP address (not within DHCP pool) is allocated exclusively to the biometric clock.

    • Related Articles

    • SY910 - Troubleshooting Checklist

      There are many ways to ensure that your machine is up and running and doesn't need further assistance to fix it. Here are common issues that can be fixed with a few simple steps. The checklist: Check that the cable is plugged into the socket ...

    • Synergy A - Troubleshooting Checklist

      There are many ways to ensure that your machine is up and running and doesn't need further assistance to fix it. Here are common issues that can be fixed with a few simple steps. Network troubleshooting solutions: Check that the Network cable is ...

    • SY910- Network Settings

      Here is the guide for standard configuration of SY910 devices is DHCP, which removes the need for a static IP address. This section explains how to configure the device on DHCP and Static IP. Follow the instructions below. Enabling DHCP on SY910 ...

    • Label Printer Setup and Troubleshooting

      Compatible Label Printer - Brother QL-820NWB Go to System setup - Devices Edit the existing Visitor Kiosk device that you would like to attach the Printer  Go to Visitor Printer Settings Tab       Administrator Pin Code  - applicable to Visitor Kiosk ...

    • Synergy A - Network Settings

            1. DHCP        a. Press the “Menu” key.           b. Insert the admin code and press Enter key         c. Select option 2 “Communications” and press enter key       d. Select option 1 - Ethernet       e. Select option 2 - DHCP         Turn it ...