Suprema Bioentry wont react to cards presented

Suprema Bioentry wont react to cards presented

When using cards with the Bioentry readers the card presented did not register on the event screen and the door did not react.

Solution : Check using Biostar software for 2 settings

Byte Type to be set as LSB not MSB
Verification method to be set to Finger OR Card and not Finger or Card & Finger

    • Related Articles

    • Finding the MAC Address of a Suprema Device

      There may be several reasons why you would like to know the MAC address of a Suprema device: You do not have a DHCP server and need to give IP address based on a MAC address You do not know the IP of your device and are having difficulty searching it ...

    • Connecting Synergy A using TPLink 4G Router with SIM

      Connecting Synergy A using 4G Router with SIM 4G Router Setup  You will have to insert the activated Sim to the router. Connect the router to your laptop through Wifi, Router name and password will be there at the back of the router.  Once it is ...

    • Finding Biostar Device Mac address using Serial Number

      Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...

    • Absence Request Email Notification process TimelogWEB / Synergy WOrkforce

      Absence Request Email Notification Process If Employee is set up with Absence manager and Deputy Manager                       Note - Absence can be approved or rejected by any one manager.  If Employee is set up with Absence manager 1 and Absence ...

    • SY 910 Face with Mifare cards

      Go to Setting → Advanced → ICID Card Type and change ID Format to Synel 13 bit. Once it is done the Mifare card number detected by SY910 should match the number read by USB enrollers.