IR Device Setup on IIS

IR Device Setup on IIS


1)      Make sure that the website is on its own Application Pool on respective server on the IIS 



2)      Make sure that the application pool is set up to allow 32-bit applications


 
3)      Make sure that RsiDotNetDLL.dll is present in bin folder of the website

4)      Setup IRController service

5)      Define respective customer key within IrControllerService.exe.config

6)      Start the Service



    • Related Articles

    • IR (Hand Punch) Setup in Synergy Workforce

      Go to Menu - System Setup - Devices Click on the icon to add device and fill in the respective parameters as required.       General Tab Type = General Utilization = Select either Time and Attendance or Access Control or both Time and Attendance + ...

    • Device Setup Overview

      For both Physical and Virtual devices, they must exist in the system in order to capture the swipes in the system Devices are setup within Menu - System Setup - Devices Filter Device       Click on icon to filter devices  Add Device       Click on ...

    • Setup VM Kiosk Device

      Go to menu – System Setup - Devices   Click on  icon to Add VM device and add necessary parameters and save    Additionally, go to Visitor Printer settings Tab  and setup following items and click save Printer IP - Must match the Static IP address ...

    • Adam 6050 Device Setup

      Introduction  ADAM 6050 Ethernet based data acquisition and control modules provide I/O, data acquisitions, and networking in one module.   Through standard Ethernet networking, ADAM 6050 retrieves I/O values from sensors (Fire Panel), and publishes ...

    • Synergy Home Android 4.2 Device Setup

      1. Setup Device       A. Power ON the device supplied with power supply.       B. Device will bootup with Chinese logo.       C. Replace it with Synel Logo             a. Go to H:\Synergy Workforce\Synergy Home\Additional Installation Files and copy ...