Finding Biostar Device Mac address using Serial Number

Finding Biostar Device Mac address using Serial Number



Finding Biostar Device Mac address using Serial Number.


If you would like to find the device’s IP based on the MAC address you can follow the steps below.
1.Check your device ID written on the device label on the back of the device.
2.Change the device ID into hexadecimal numbers. One option is to use Windows’ Calculator.
3.Open Windows Calculator and press alt + 3 to change to the programmer’s calculator.
4.Select Dec and input the device ID.




  |




5.Click Hex. Result is 20471BC5. This is going to be the latter half of the MAC address.





  |


6.Check the MAC address chart below to see what the first half of the MAC address will be.
7. My device is an A2, so the MAC address will start with 00-17-FC-47-XX-XX.
8.Hence my MAC should be 00-17-FC-47-1B-C5.
9.Open a command prompt and type arp –a.
10.Search for the device’s MAC address on the list.



Suprema Device MAC Address Chart


Suprema devices have the same fixed hexadecimal digit for the first six digits.
The two digits after 00-17-FC are different based on the device model. Please refer to the chart below.










    • Related Articles

    • Finding Biostar Device Mac address using Serial Number

      Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...

    • Finding the MAC Address of a Suprema Device

      There may be several reasons why you would like to know the MAC address of a Suprema device: You do not have a DHCP server and need to give IP address based on a MAC address You do not know the IP of your device and are having difficulty searching it ...

    • Checking Device IP and MAC Address

      Checking Device IP and MAC Address Manually  There may be several reasons why you would like to know the MAC address of a Suprema device: You do not have a DHCP server and need to give IP address based on a MAC address. You do not know the IP of your ...

    • ER2 - New Suprema Devices Maintenance Menu

      There is a new menu ‘Maintenance’ > ‘Biostar Devices’ that allows full control over deleting and syncing persons and access control data to the Suprema biostar devices. The screen has two selection boxes, one for persons and the other for devices. ...

    • Secure IO Relay does not open for XPass on Biostar

      If you’re using Secure Relays with Xpass and the relay doesn’t open despite being defined correctly in Biostar as the Secure IO Relay (not the internal Xpass) then check your Firmware version. FW 1.2.3 doesn’t work and should be replaced with FW1.2.4 ...