Enrolment Agent Setup on Local PC
Bio Mini Enroller agent setup in Local PC
- For web enrolment to work, each client PC will need to have Web Agent running locally.
- Next you run the AgentCtrl.exe from the files I shared in attachment (You may need to run it with elevate permission depending on the security set for individual user)
- Create Shortcut if required on desktop.
- This should start web agent and must display following status (by default it hides under taskbar on the right-hand side)
- Don’t Change the Port no(unless already taken by something else on the PC). Leave it as it is to 8084
- Don’t use https for now.
- Leave the localhost as it is
- Keep Alive must be ticked.
- Setup Device within TimeLOG Web – Setup done by Synel technical Team.
Go to System Setup – devices
Add device and select the Model – Finger Enrolment, screen will change automatically with limited options.
Give the Device ID, Description, IP address (Public IP of the client)
Next go to Settings Tab
Settings must match from Web Agent i.e. Protocol, domain and the Port no.
Rest is for you to setup and click Save.
Go to enrolment screen for enrolling templates.
Related Articles
Enrolment Agent Setup on Local PC
Bio Mini Enroller agent setup in Local PC BEFORE INSTALLING ensure you have installed Visual C++ 2008 SP1 32bit do NOT use the 64bit installer use 32bit on all machines. ...Bio Mini USB fingerprint enroller not detected on SynergyWF enrolment screen
For web enrolment to work, each client PC will need to have Web Agent running locally. Run the AgentCtrl.exe from the files (You may need to run it with elevate permission depending on the security set for individual user), You can get relevant ...Finger enrolment drivers Installation - Apllication Side by Side configuration error message
Install Suprema Bio drivers 2.1, Web agent 3.8 but had to remember to install the x86 version of Microsoft C++ 2008!!! (do not use the x64 they wont work if you do regardless of if the hardware is 64bit) newer driver packages do not work must be this ...Finding Biostar Device Mac address using Serial Number
Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...Connecting Synergy A using TPLink 4G Router with SIM
Connecting Synergy A using 4G Router with SIM 4G Router Setup You will have to insert the activated Sim to the router. Connect the router to your laptop through Wifi, Router name and password will be there at the back of the router. Once it is ...