Checking Device IP and MAC Address

Checking Device IP and MAC Address



Checking Device IP and MAC Address Manually 




  1. There may be several reasons why you would like to know the MAC address of a Suprema device:
  2. You do not have a DHCP server and need to give IP address based on a MAC address.
  3. You do not know the IP of your device and are having difficulty searching it through BioStar’s search function.
  4. You are using static IP but are unsure if you have already allocated the IP address to another device.



Methods to Check the MAC Address


  1. Note: The PC you are using must be on the same network of the device to use these commands

  3. 1. Finding IP and MAC addresses of all devices on the local network:


Type ‘arp –a’ on a command prompt




  |



2. Finding a device’s MAC address based on IP address:


Type ‘arp –a [ip address] on a command prompt






  |


 






    • Related Articles

    • Finding the MAC Address of a Suprema Device

      There may be several reasons why you would like to know the MAC address of a Suprema device: You do not have a DHCP server and need to give IP address based on a MAC address You do not know the IP of your device and are having difficulty searching it ...

    • Finding Biostar Device Mac address using Serial Number

      Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...

    • Finding Biostar Device Mac address using Serial Number

      Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...

    • Access Control Event Types by Device

      Apart from generic event types, please see below specific Event types by device that we currently support within Synergy Workforce   I.e. you can enable them under Event Types so that they are visible within Guard Screen     SALTO:   100 SALTO - Open ...

    • Cant Allocate Devices on New Department

      If you wish to use Department Allocation for devices but when you go to the devices tab of the department the list of AVAILABLE devices is blank. this is because ALL devices have already been allocated to branch of the department tree higher upstream ...