Cant Allocate Devices on New Department

Cant Allocate Devices on New Department

If you wish to use Department Allocation for devices but when you go to the devices tab of the department the list of AVAILABLE devices is blank.

this is because ALL devices have already been allocated to branch of the department tree higher upstream and as a sub department your new department inherits the devices from above so there aren't any AVAILABLE devices so none are listed. 

Only clocks that are available for selection will appear here. eg (Recently added devices not already allocated higher up stream)

    • Related Articles

    • ER2 - New Suprema Devices Maintenance Menu

      There is a new menu ‘Maintenance’ > ‘Biostar Devices’ that allows full control over deleting and syncing persons and access control data to the Suprema biostar devices. The screen has two selection boxes, one for persons and the other for devices. ...

    • Installing Timelog 9 3 on a Windows 8 or Server 2012 PC

      Installing Timelog 9.3 on a Windows 8 or Server 2012 PC. Ignore the drivers that come on the install CD they wont work. Get the latest from Manufacturer's Website You must then install in this order! Disable UAC Disable DEP install the NEW drivers ...

    • ER2 - Cashless - Product Purchase Limit

      Synel ER2 Cashless                                                                                                                          04/05/2019 New feature for product purchase limit. Applies to version 3.7.0.29052019 and above 1. Access ER2 ...

    • Secure IO Relay does not open for XPass on Biostar

      If you’re using Secure Relays with Xpass and the relay doesn’t open despite being defined correctly in Biostar as the Secure IO Relay (not the internal Xpass) then check your Firmware version. FW 1.2.3 doesn’t work and should be replaced with FW1.2.4 ...

    • SY910 Error on swipe online

      Synergy Face 910 Red Error on Swipe Online If the clock registers as Online with the network icon in the top left but every time you swipe you get this error. Check that the 10 Digit Buffer has been activated in the device definitions