Access Control Event Types by Device

Access Control Event Types by Device

Apart from generic event types, please see below specific Event types by device that we currently support within Synergy Workforce

 

I.e. you can enable them under Event Types so that they are visible within Guard Screen

 

 

SALTO:

 

100

SALTO - Open with inside handle

101

SALTO - Open with card, PIN or card+PIN

102

SALTO - Open from Host

103

SALTO - Start Office Mode with card, PIN or card+PIN

104

SALTO - End Office Mode with card, PIN or card+PIN

105

SALTO - Intrusion alarm

106

SALTO - Tamper alarm

107

SALTO - Door Left Open alarm

108

SALTO - End of Door Left Open alarm

109

SALTO - End of Intrusion alarm

110

SALTO - End of Tamper alarm

111

SALTO - The communication with the lock has been lost

112

SALTO - The communication with the lock has been re-established

113

SALTO - Card, PIN or card+PIN rejected

114

SALTO - Low battery warning

 

BioStar events:
 
920    Forced to Open
932    Held Door Open

933    Door Opened

934    Door Closed

935    Door Locked

936    Door Unlocked
 
Sy400 events:
411    Sensor 1 Activated (SY400 Only)

412    Sensor 2 Activated (SY400 Only)

413    Tamper Activated (SY400 Only)

414    Sensor 1 Open Too Long (SY400 Only)

415    Sensor 2 Open Too Long (SY400 Only)

416    Sensor 1 Close After Too Long (SY400 Only)

417    Sensor 2 Close After Too Long (SY400 Only)

418    External Sensor Activated (SY400)

    • Related Articles

    • Finding Biostar Device Mac address using Serial Number

      Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...

    • ACCESS CONTROL - EVENTS - ALERTS BY EMAIL

      ACCESS CONTROL - EVENTS - ALERTS BY EMAIL     We support various placeholders for the email message: {readerName} {readerId} {readerNumber} {relayNumber} {terminalName} {terminalIP} {terminalId} {deviceId} {employeeName} {badge} {atTime} {onDate}   ...

    • Finding Biostar Device Mac address using Serial Number

      Finding Biostar Device Mac address using Serial Number. If you would like to find the device’s IP based on the MAC address you can follow the steps below. 1.Check your device ID written on the device label on the back of the device. 2.Change the ...

    • Secure IO Relay does not open for XPass on Biostar

      If you’re using Secure Relays with Xpass and the relay doesn’t open despite being defined correctly in Biostar as the Secure IO Relay (not the internal Xpass) then check your Firmware version. FW 1.2.3 doesn’t work and should be replaced with FW1.2.4 ...

    • Finding the MAC Address of a Suprema Device

      There may be several reasons why you would like to know the MAC address of a Suprema device: You do not have a DHCP server and need to give IP address based on a MAC address You do not know the IP of your device and are having difficulty searching it ...